Designed to run an extra 3 Litres of oil (8 Litres total).
- CNC machined cut out to ensure 100% Flat before welding.
- CNC laser baffled setup.
- Welded on block to ensure 0 warp.
- Welded on both the inside and outside to ensure no leakage.
- -10 an fitting on request for head drain.
Can make these sumps to suit our block brace kits. Need to remove 10mm of material to be able to locate the lower gearbox bolt holes.
Oil return ports also dilled out below axel.
Exchange basis only. You send us your old sump and oil pick up and we will send you back one of ours. Shipping to us is your responsibility and cost. Sump must have diff removed for us to be able to modify. Or your cost to remove and re-install locally.