The EWP®115 (115 litres per minute) pump is suitable for small, medium, large, high- performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.
The EWP®115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp).
EWP115 (Alloy) 12V 1
Adapter Rubber Sleeve 3mm (1/8”) 2
Hose Clamps 2
EWP Basic Pump Loom 1
Hardware Bag 1
Voltage:12 Volt Pump
Operating voltage: 3V DC to 15V DC
Maximum current: 10A @ 13V
Flow rate (max): 115 L/min (30.38 US gal/min) @ 13V DC
Operating temp:-40° to 130°C) (-40° to 266°F)
Pump weight: 920 grams (2.03 lb)
Pump material: Aluminium (powder coated)
Burst pressure: 500 kPa (72.5 psi)
Fits hose sizes:35mm to 51mm (1⅜” to 2”) Inlet: -16AN (12) Outlet: -16AN (12)
Push-On fitting Size - EWP Inlet & Outlet 38mm
Or use 3mm Sleeve (#8510) 44mm or 6mm Sleeve (#8511) 51mm
Combined with an LCD EWP®/Fan Digital Controller (Sold separately Part #8001 or Combo Pack Part #8950), the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life.
Davies, Craig’s revolutionary, Australian-designed EWP® pumps are made from anti-corrosive, lightweight nylon reinforced with fibreglass. Universal fit allows for easy mounting into the bottom radiator hose. Kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring.
An Electric Water Pump is one of the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.
Used in conjunction with a Davies, Craig EWP® header adaptor kit, it can replace the mechanical water pump completely.